ZL-005 Fluorosilicone Product details This product is silicon fluoride polymer-based plastic, with a variety of additives, kneading, fluorine rubber and silicone rubber composite characteristics, with excellent resistance to polar and non-polar solvents and oil resistance, and long-term use in the range of -50 ~ 250 ℃, widely used in the production of oil pipes, belts, seals, seals, oil seals, pipe transporting acid medium class and other products. Technical Specifications Item Value Appearance translucent share 1.35 hardness, Shore A 65 Tensile strength, MPa 10 tear strength, KN / m ≥28.0 elongation at break,% ≥230 compression set ≤14 177 ℃ 22hr, 30%) Product Applications automotive applications, air conditioning compressor seals, oil seals, seal metering, fuel tank cap, joystick, speedometer, cables, brakes, fuel system valve seals and other fields. Features and benefits of fluorine-modified silicone polymer additives molding, extrusion easy oil, solvent resistance superior flame resistance, good insulation has been added to good use 1. curing agent, directly on the mixer and rolling 25 times, mixing time of about 8 minutes, to ensure uniformity of materials. 2. The period of curing temperature: T = 165 ℃ ± 2; Sec curing conditions: 200 ℃ × 4h; recommend some curing time: t = 10-15min (according to the size of the parts to determine the curing time) Storage and shelf life product non-dangerous goods. Transport, storage as a general non-dangerous goods transport; avoid the sun and rain. This product does not run out before, after each use should be tightly sealed container. Use of this product is valid for one year.